Bluetooth and ANT+ Sensors

The Dash can be paired to Bluetooth and ANT+ sensors, including power meters, heart rate monitors, speed and cadence sensors, as well as smart trainers and other bio-sensors. To pair to a Bluetooth or ANT+ sensor:

  1. First activate or wake the sensor up.
    - Heart rate monitor: Put the sensor on.
    - Speed/Cadence sensors: Either move or pass by the corresponding magnet.
    - Power meter: Rotate the sensor.
  2. Go to Main Menu > Activity Sensors > Add Sensor >  BLE or ANT Sensors.
    - A list of sensors available to the Dash will populate.
  3. Select a sensor and then choose from the following options:
    - Cancel: Cancels selection and sensor will not be added
    - Confirm: Adds sensor to the currently selected activity profile.
    - Enabled Activities: Adds sensor to all currently enabled activity profiles.
    - Add to All: Adds sensor to every activity profile.


Manual Entry (ANT+)

ANT+ sensors have simple ANT+ IDs that can be entered and saved to the Dash without using the search function. If the sensor has a visible ANT+ ID, it can be added directly into the activity sensors list:

  1. Go to: Main Menu > Activity Sensors > Add Sensors > Manual Entry.
  2. Select Sensor Type, then use the arrow buttons   to select the correct sensor category.
  3. Press the enter button  to confirm selection, then select Confirm.
  4. Locate the ANT+ ID number on your sensor and enter it into the number field.
    - Use the arrow buttons    to change the digit and then use the enter button to advance to the next digit.
    - Note that if your sensor ID is shorter than the number of fields, it should be preceded by 0s.